Toplam kayıt 92, listelenen: 1-20

    • An integrated permanent magnet Micro-turbo- generator supported on microball bearings 

      Beyaz, Mustafa İlker; Hanrahan, Brendan M.; Feldman, Jeremy H.; Ghodssi, Reza (Journal of Microelectromechanical Systems, 2013)
      This paper presents the design, fabrication, and testing of an integrated microturbogenerator utilizing permanent magnets and microball bearings. The key components of this generator are the following: 1) a silicon ...
    • Monitoring of actuation conditions in a micro- turbo-generator 

      Beyaz, Mustafa İlker; Hanrahan, Brendan M.; Feldman, Jeremy H.; Ghodssi, Reza (IEEE Sensors Journal, 2013)
      This paper presents the theory and implementation of an integrated sensing technique for the real-time measurement of applied actuation conditions in a micro-turbo-generator. The device is composed of a microturbine rotor ...
    • An adhesion-dominated rolling Friction regime unique to micro-scale ball bearings 

      Hanrahan, Brendan M.; Misra, Saswat; Beyaz, Mustafa İlker; Feldman, Jeremy H.; Waits, Christopher M.; Ghodssi, Reza (Tribology Letters, 2014)
      We demonstrate that micro-scale rolling bearings exhibit friction and wear properties markedly different from their macro-scale counterparts. A microfabricated testing platform uses variable rolling element diameters or ...
    • An investigation on the electromagnetic design optimization of rotary micromachines with double-layer permanent magnets 

      Özkaya, Kamil Yunus; Beyaz, Mustafa İlker (Sensors and Actuators A: Physical, 2015)
      Electromagnetic design optimization of axial-flux rotary micromachines utilizing double-layer permanent magnets is presented and applied to a micro-scale generator/spirometer currently under development. Double-layer magnet ...
    • The development and performance characterization of turbine prototypes for a MEMS spirometer 

      Göreke, Utku; Habibiabad, Sahar; Azgın, Kıvanç; Serinağaoğlu Doğrusöz, Yeşim; Beyaz, Mustafa İlker (IEEE Sensors Journal, 2016)
      The design, optimization, and performance characterization of turbine prototypes for the development of a Microelectromechanical Systems spirometer is reported. Four different turbines were designed based on large-scale ...
    • Fabrication and characterization of TiO2 nanoparticles conjugated luminescence upconversion nanoparticles 

      Demirel Topel, Seda; Topel, Önder; Turgut Cin, Günseli (Open Access Journal, 2018)
      TiO2 nanoparticles conjugated luminescence upconversion (TiO2-UC) nanocomposites have been fabricated by covalently linking of carboxyl-functionalized TiO2 and amino-functionalized NaYF4:Yb3+,Er3+,Ce3+ upconversion ...
    • CP-less OFDM with alignment signals for enhancing spectral efficiency, reducing latency, and improving PHY security of 5G services 

      Hamamreh, Jehad M.; Ankaralı, Zekeriyya Esat; Arslan, Hüseyin (IEEE Access, 2018)
      Although orthogonal frequency-division multiplexing (OFDM) is a widely accepted waveform in many standards and is expected to keep its dominance in future 5G systems with various types of parameterized waveforms, its ...
    • Transfer entropy 

      Gençağa, Deniz (MDPI AG, 2018)
      Statistical relationships among the variables of a complex system reveal a lot about its physical behavior. Therefore, identification of the relevant variables and characterization of their interactions are crucial for a ...
    • Joint PHY/MAC layer security design using ARQ with MRC and null-space independent PAPR-aware artificial noise in SISO systems 

      Hamamreh, Jehad M.; Arslan, Hüseyin (IEEE Transactions on Wireless Communications, 2018)
      Automatic-repeat-request (ARQ) as a MAC layer mechanism and artificial noise (AN) as a physical layer mechanism along with the help of maximal ratio combining (MRC), are jointly designed to achieve secrecy. Basically, a ...
    • Transfer entropy 

      Gençağa, Deniz (MDPI, 2018)
    • A non-resonant kinetic energy harvester for bioimplantable applications 

      Beyaz, Mustafa İlker; Baelhadj, Hacene; Habibiabad, Sahar; Adhikari, Shyam; Davoodi, Hossein; Badilita, Vlad (Micromachines, 2018)
      A linear non-resonant kinetic energy harvester for implantable devices is presented. The design contains a metal platform with permanent magnets, two stators with three-dimensional helical coils for increased power generation, ...
    • A turbine-based MEMS sensor for spirometry with wearable devices 

      Beyaz, Mustafa İlker; Habibiabad, Sahar; Yıldız, Hamza; Göreke, Utku; Azgın, Kıvanç (IEEE Sensors Journal, 2019)
      This paper presents a turbine-based microelectromechanical systems (MEMS) sensor for spirometry application. The compact sensor dimensions allow integration into smart wearable devices for mobile spirometry without a ...
    • Hybrid magnetic-piezoelectric energy harvester for power generation around waistline from gait 

      Beyaz, Mustafa İlker; Tat, Fatih; Özkaya, Kamil Yunus; Özbek, Ramazan (Journal of Electrical Engineering & Technology, 2019)
      The development of a novel hybrid energy harvester for scavenging power around human waistline is presented. The harvester is composed of mm-scale electromagnetic coils and piezoelectric transducers incorporated on a belt, ...
    • Effects of neuronal noise on neural communication 

      Gençağa, Deniz; Şengül Ayan, Sevgi (Proceedings, 2019)
      In this work, we propose an approach to better understand the effects of neuronal noise on neural communication systems. Here, we extend the fundamental Hodgkin-Huxley (HH) model by adding synaptic couplings to represent ...
    • Energy harvesting from knee motion using piezoelectric patch transducers 

      Beyaz, Mustafa İlker (Academic Platform Journal of Engineering and Science, 2019)
      This paper presents a piezoelectric energy harvesting device that generates electrical power from knee motion during human gait. The device is composed of two MEMS-based piezoelectric patch transducers optimized for placement ...
    • Investigation of diamagnetic levitation for dynamic MEMS devices 

      Beyaz, Mustafa İlker (4th International Mediterranean Science and Engineering Congress (IMSEC 2019), 2019)
      The mechanical performance and lifetime of dynamic MEMS (micro electro mechanical systems) devices such as micropumps, micromotors, and micropositioners heavily rely on the bearing mechanism that enables motion per applied ...
    • Non-planar drive-sense coil structure for inductive MEMS microphones 

      Beyaz, Mustafa İlker (International Symposium on Advanced Engineering Technologies, 2019)
      MEMS technology offers major advantages for the development of microphones including a small footprint, low power consumption, high sound sensitivity and bandwidth. Capacitive, piezoelectric, and inductive microphones have ...
    • Modulation options for OFDM-based waveforms: classification, comparison, and future directions 

      Jaradat, Ahmad M.; Hamamreh, Jehad M.; Arslan, Hüseyin (IEEE, 2019)
      This paper provides a comparative study on the performance of different modulation options for orthogonal frequency division multiplexing (OFDM) in terms of their spectral efficiency, reliability, peak-to-average power ...
    • OFDM-subcarrier power modulation with two dimensional signal constellations 

      Belallou, Youcef; Hamamreh, Jehad M.; Hajar, Abdulwahab (2019 Innovations in Intelligent Systems and Applications Conference (ASYU), 2019)
      An original modulation technique has been recently proposed for wireless communication systems known as OFDM- SPM (OFDM with Subcarrier Power Modulation). This technique utilizes a characteristic of the subcarriers of the ...
    • Physical layer security for NOMA: requirements, merits, challenges, and recommendations 

      Furqan, Haji Muhammad; Hamamreh, Jehad M.; Arslan, Hüseyin (2019)
      Non-orthogonal multiple access (NOMA) has been recognized as one of the most significant enabling technologies for future wireless systems due to its eminent spectral efficiency, its ability to provide an additional ...